| 1,637 | 20 | 52 |
| 下载次数 | 被引频次 | 阅读次数 |
文章通过数值模拟结果确定适合的三维圆柱体绕流流场的尺寸,采用不同的计算流体力学(CFD)软件对有限元模型进行网格划分,对比网格划分质量的优劣,选择适合数值模拟的软件CFX。确定采用的网格形式为六面体网格(Hex8)以及流场不同部分网格的尺寸。圆柱绕流展向各截面平均压力系数沿周向无明显变化,脉动压力系数变化显著,绕流后的旋涡发放形式具有明显的三维特性的数值模拟结果验证了本文的流场选择和网格化分尺度的合理性。
Abstract：Based on the numerical simulation,the appropriate flow field sizes of the flow around the three-dimensional circular cylinder were chosen.The FEM model was divided into grids using different CFD softwares,and the qualities of different meshes were compared.Then the CFD software CFX,the Hex8 mesh type and the meshes sizes were adopted.The pressure coefficient on different sections around the three-dimensional circular cylinder did not change significantly,but the fluctuating pressure coefficient changed significantly.The shedding form and the vortex tube have the three dimensional characteristics.The numerical simulation results confirm the rationality of flow field size selection and mesh generation.
[1]Breuer M.Numerical and modelinginfluences onlarge eddy simulationforthe flowpast a circular cylinder[J].Heat and Fluid Flow,1998(19):512-521.
[2]Breuer M.Achallengingtest case for large eddy simulation:high Reynolds number circular cylinder flow[J].Heat and Fluid Flow,2000(21):648-654.
[3]Lei C,Cheng L,Kavanagh K.Spanwise length effects onthree-dimentional modeling of flowover a circular cylinder[J].Comput.Meth-ods Appl.Mech.Engrg.,2001(190):2 909-2 923.
[4]Pontaza J P,Chen HC.Three-dimensional numerical simulations of circular cylinders undergoingtwo degree-of-freedomvortex-in-duced vibrations[C]//Karadeniz H.Proceedings of 25th international Conference on Offshore Mechanics and ArcticEngineering.Germany:Hamburg,2006.
[5]Esperanca PT,WanderleyJ B,Levi C.Validation of athree-dimensional large eddysimulationfinite difference methodtostudy vortexin-duced vibration[C]//Karadeniz H.Proceedings of 25thinternational Conference on Offshore Mechanics and Arctic Engineering.Germany:Hamburg,2006.
[6]王亚玲,刘应中,缪国平.圆柱绕流的三维数值模拟[J].上海交通大学学报,2001,35(10):1 464-1 469.WANG YL,LIUYZ,MIAO G P.Three-Dimensional Numerical Simulation of Viscous Flowaround Circular Cylinder[J].Journal ofShanghai Jiao Tong University,2001,35(10):1 464-1 469.
[7]姚雄亮,方媛媛,戴绍仕,等.基于LES方法圆柱绕流三维数值模拟[J].水动力学研究与进展,2007,22(5):564-572.YAOXL,FANGYY,DAI S S,et al.Three-Dimensional Numerical Simulation of theflowpast a circular cylinder based on LES method[J].Journal of Hydrodynamics,2007,22(5):564-572.
[8]陈兵,李玉成,赖国璋.近底水平圆柱振荡绕流的三维数值模拟[J].水动力学研究与进展,2002,17(1):9-16.CHENB,LI YC,LAI GZ.Three-dimensional numerical simulation of the flowpast a Concussion circular cylinder near the end of thelevel[J].Journal of Hydrodynamics,2002,17(1):9-16.
[9]方媛媛.三维圆柱体漩涡发放特性的数值实验研究[D].哈尔滨:哈尔滨工程大学,2007.
[10]Catalano P,Wang M,Iaccarino G,et al.Numerical simulation of the flowaround a circular cylinder at high Reynolds number[J].Heatand Fluid Flow,2003(24):463-469.
[11]Franke J,Frank W.Large eddysimulation of theflowpast a circular cylinder atReD=3 900[J].Journal of Wind Engineering andIndus-trial Aerodynamics,2002(90):1 192-1 206.
[12]Dong S,Karniadakis GE.DNSof flowpast a stationary and oscillating cylinder atRe=10 000[J].Journal of Fluids and Structures,2005(20):519-531.
[13]Saha AK,Biswas G.Three-dimentional study of flowpast a square cylinder at lowReynolds numbers[J].Heat and Fluid Flow,2003(24):54-66.
[14]张兆顺,崔桂香,许春晓.湍流理论与模型[M].北京:清华大学出版社,2005.
[15]Norberg C.Fluctuatinglift on a circular cylinder:reviewand new measurements[J].Fluids and Structures,2003(17):57-96.
[16]林宗虎.气液两相流涡脱落特性及工程应用[M].北京:化学工业出版社,2001.
基本信息:
DOI：
中图分类号:O35
引用信息:
[1]方媛媛.三维圆柱体绕流数值模拟流场选择及网格划分[J].水道港口,2009,30(01):70-76.
基金信息: