| 1,537 | 38 | 106 |
| 下载次数 | 被引频次 | 阅读次数 |
以大型通用有限元计算软件ANSYS为平台,建立了荷载作用下钢筋混凝土构件裂缝宽度的一种计算方法。采用ANSYS中的Solid 65单元模拟混凝土,Link 8单元模拟钢筋,三维非线性弹簧单元Combine 39模拟钢筋-混凝土界面的粘结滑移关系,将Houde提出的钢筋-混凝土间的粘结滑移本构模型引入ANSYS中以确定Combine 39弹簧单元的荷载-位移关系式。此外,在现有混凝土裂缝宽度计算方法的基础上,推导出适用于有限元分析的裂缝宽度计算公式,并应用ANSYS软件提供的二次开发工具——参数化编程语言(APDL)编制程序,在ANSYS后处理中实现混凝土构件裂缝宽度的计算功能。算例分析表明,与现有方法相比,该方法能更准确地计算各级荷载作用下钢筋混凝土构件的裂缝宽度。
Abstract：Based on the FEM software ANSYS,a calculation method for crack width of reinforced concrete member is proposed.The element Solid 65 in ANSYS is used to simulate concrete,the element Link 8 is used to simulate reinforced bar,and the nonlinear spring element Combine 39 is used to simulate the bond-slip relationship between rebar and concrete,in which the Houde′s bond-slip model is introduced.On the basis of current crack width calculation method,the improved crack width calculation formula for FEM analysis is induced and added the post-processing function of ANSYS using the secondary development tool APDL programmer in ANSYS.The illustration example shows that the calculation results of the FEM method presented herein is more accurate to predict the crack width of reinforced concrete member under every load level comparing with the current methods.
[1]Saliger R.High grade steel in reinforced concrete[M].Berlin-Munich:Preliminary publication,2nd Congress of IABSE,1936.
[2]Broms B B.Crack Width and Spacing in Reinforced Concrete Members[J].ACI,1965,62(10):1 237-1 256.
[3]Broms B B,Lutz L A.Effects of Arrangement of Reinforcement on Crack Width and Spacing of Reinforced Concrete Members[J].ACI,1965,62(11):1 395-1 410.
[4]Base G D.Crack control in reinforced concrete-present position[M].Melbourne:Syposium on Serviceability of Concrete,1975.
[5]Gergely P,Lutz L A.Maximunm Crack Width in Reinforced Concrete Flexural Members,Causes,Mechanisms and Control of Cracking inConcrete[M].Detroit:American Concrete Institute,1968.
[6]GB 50010-2002,混凝土结构设计规范[S].
[7]JTJ267-98,港口工程混凝土结构设计规范[S].
[8]Brian D S.Crack Widths in Reinforced Concrete Detroit[M].Calgary:University of Calgary,1999.
[9]Ngo D,Scordelis A C.Finite element analysis of reinforced concrete beam[J].ACI,1967,64(3):152-163.
[10]宋玉普,赵国藩.钢筋混凝土构件裂缝宽度的有限单元法分析[J].大连工学院学报,1985,24(4):115-119.SONG Y P,ZHAO G F.Finite Element Analysis of Crack Width of Reinforced Concrete Members[J].Journal of Dalian University ofTechnology,1985,24(4):115-119.
[11]吴盛星.混凝土裂缝开展宽度计算的有限单元法[J].计算力学学报,1997,14(1):69-77.WU S X.Finite element method of crack width computation in concrete structures[J].Chinese Journal of Computational Mechanics,1997,14(1):69-77.
[12]王依群,王福智.钢筋与混凝土之间的黏结滑移在ANSYS中的模拟[J].天津大学学报,2006,39(2):209-213.WANG Y Q,WANG F Z.Simulation of Bond-Slip Relationship Between Concrete and Reinforcing Bar in ANSYS[J].JOURNAL OFTIANJIN UNIVERSITY,2006,39(2):209-213.
[13]孟晓娟.碳纤维布增强码头预应力混凝土梁载力研究[D].天津:天津大学,2004.
基本信息:
DOI：
中图分类号:TU375
引用信息:
[1]田双珠,丁嵬,王元战.基于ANSYS的钢筋混凝土构件裂缝宽度计算方法[J].水道港口,2008,No.120(05):351-357.
基金信息:
国家自然科学基金(50579046)